Flashing Guide For Nokia Windows Phone

Flashing Guide For Nokia Windows Phone

Use Windows Phone Image Designer Tool

Step 1. Download and extract Windows Phone Image Designer Tool on your Windows

Computer. After Extracting you will be able to see the following  screen

Step 2. Following Folder run installsimpleio.bat file to install the Driver.

Step 3. Now, Open the Windows Phone Image Designer Tool (if you have 32 Bit Computer then

Open Windows Phone Image Designer Tool  32 ImageDesigner start-bat file OR if you

have 64 Bit Computer then Open Windows Phone Image Designer Tool  64 Image Designer

Start-bat Following This Image

Step 4. Windows Phone image Designer Tool Launched Following This image

Step 5. Now, Select Flash a Windows Phone image onto your phone Option and Click on Next

Button.

Step 6 . Now Connect Your phone to Pc By Pressing Vol+ then Windows tools Looking Following Screen

Step 7. Chose Change Option to Load firmware And Press Next Button

Step 8. Now, Locate the Stock Firmware that you want to flash on your Windows Phone (.ffu

file).

Step 9. Press Flash And Wait until Finish ( It Takes 5-10 Minute)

Step 10. After Finish show Following Command